Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Air filter

See other generations:
Video tutorial

The air filter fitted in your Fiat Panda 169 (Mk2) is a very important component that directly contributes to maintaining optimal engine health. Below, discover how to replace it quickly and safely.

Once the car is completely off and the engine has cooled down, lift the front bonnet and locate the central cover. Remove the two safety clips and detach the upper cover.

At this point, replace the old filter with the new one, and finally, reattach the cover, remembering to secure the safety clips.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…
How to Change the Cabin Filter on a Fiat Panda 169
How to Change the Cabin Filter on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Replacing the cabin air filter on a Fiat Panda 169 is very straightforward as the filter is located behind the centre tunnel console and can be easil…
Removing the Mass Air Flow Sensor from the Fiat Panda 2 (169) 1.2 8V
Removing the Mass Air Flow Sensor from the Fiat Panda 2 (169) 1.2 8V
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you will learn how to remove and clean the mass air flow sensor from the Fiat Panda second series (169) with a 1.2 8-valve en…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos