Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front fender on an Abarth 500

Model: Fiat 500 500 X - Years 2014-2022
Part: Front bumper

To replace the Cadamuro front fender of an Abarth 500 car, you must first open the bonnet and loosen the screws in the wheel arch and inside the bonnet that keep the fender installed and remove it from the car. Now proceed with the assembly of the new mudguard, starting to screw previously the bolts placed inside the bonnet to be able to support it. Manually insert the bolts into the fender and then tighten them with a wrench. Carry out the same procedure with the screws located on the left of the headlight, making sure that they match perfectly. To finish the job, all that remains is to fix the external cover by cleaning it with the appropriate screws.

Posted on 11 June 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located on the 2017 Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) Being able to independently locate the OBD port inside your 2017 Fiat 500 Abarth can be difficult as the OBD port in question is well hidden inside t…
How to reset the service warning light on an Abarth 500
How to reset the service warning light on an Abarth 500
Fiat 500 (2007-2021 / ) The video demonstrates the procedure for resetting the service warning light on an Abarth 500. Before carrying out this procedure, it is advisable to…
How to replace the front headlight bulb of the Fiat 500 Abarth.
How to replace the front headlight bulb of the Fiat 500 Abarth.
Fiat 500 (2007-2024 / 312) The replacement of a front headlight bulb on a Fiat 500 Abarth vehicle follows the same steps used for replacing a front headlight bulb on a Fiat 500…

Other guides you may be interested in

How to Remove the Steering Wheel Airbag on a Fiat Panda

How to remove the steering wheel airbag on a Fiat Panda? Before removing the car's steering wheel, disconnect the battery terminals located in the engine bay. Here's how to proceed with the removal: remove the inspection caps at the back of the steering wheel (if present), then unscrew the screws/fasteners of the steering wheel cover (where the airbag is located) using a socket wrench or screwdriver. Once the airbag is released (driver's side), disconnect the power connectors and remove it from the steering wheel. For reassembly of the airbag: connect the power connectors and fit the airbag with the screws.

Watch the video!


by ScegliAuto

More videos