Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit Spark Plugs in Your Car

Model: Fiat Punto MK 1, 176 - Years 1993-1999
Part: Spark plugs

The spark plugs of a car are very important components of the ignition system and are part of the ignition organs of the internal combustion engine. To maintain maximum efficiency, spark plugs should be cleaned every 10,000 miles and replaced every 20,000.
To determine which spark plugs to fit in your car, check the owner's manual. To change them, first disconnect the high-tension leads connecting them to the distributor and clean the area around the spark plugs. Unscrew the spark plugs using the appropriate tool, and before installing the new ones, check that there is the correct gap between the electrodes.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs and Ignition Leads on a Fiat Punto 1.2 8V
How to Replace the Spark Plugs and Ignition Leads on a Fiat Punto 1.2 8V
Fiat Punto (1999-2011 / MK 2, 188) Today, we will see, in this brief and simple guide, the instructions to disassemble and replace the spark plugs and ignition leads on a Fiat Punto 1.…
How to Replace the Spark Plugs on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the spark plugs on a Fiat Grande Punto, open the bonnet to remove the plastic cover from the top of the engine bay by loosening the screws…
How to Remove the Spark Plugs from a Fiat Punto
How to Remove the Spark Plugs from a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the spark plugs from a Fiat Punto? Open the front bonnet and proceed with the spark plug removal. Lift the bonnet and secure it, then r…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos