Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to replace the spark plugs and spark plug wires of the Fiat Punto 1.2 8V

Fiat Punto - Video tutorial

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Spark plugs
Operation: How to replace the spark plugs and spark plug wires of the Fiat Punto 1.2 8V

Today we will see, in this short and simple guide, the instructions that will allow us to disassemble and replace the spark plugs and spark plug cables from the Fiat Punto 1.2 8V. First of all, we open the bonnet of our car and begin to disassemble and remove the air filter box, disconnecting it from the throttle body; then we go to disconnect the spark plug wires, using a socket wrench with extension to unscrew and remove the spark plugs, as shown in the video. At this point we replace the cables and install the new spark plugs, of the right type and with the same pitch!


Posted on 26 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - What causes the cold start problem of the Fiat Grande Punto 1.2 8V? Read Answer
    • Punto 1999-2011 - How much does it cost to replace the spark plugs on the Fiat Punto 1.3 multijet? Read Answer
    • Punto 1999-2011 - How much do the spark plugs on the 2001 Fiat Punto 1.2 ELX cost? Read Answer
    • Punto 1999-2011 - How much do the Fiat Punto spark plugs cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos