Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Filter in the Third Series Panda?

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Air filter

Today, you will learn how to maintain the engine air filter of the Fiat Panda third series. First, you need to remove the air box to access the air filter and check its condition. To do this, first unscrew the screw holding the intake connector, then the two screws located on the top of the air box, and finally the clamp of the air outlet. Now that you have detached the air box, move to your workbench and unscrew the air filter, as shown in the video tutorial. At this point, you can pull out the filter and, if necessary, clean it or directly replace it with a new one. Once this work is completed, the air box with the new air filter can be repositioned, following the reverse procedure of the previous steps.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…
Replace the Cabin Air Filter on Fiat Panda 3
Replace the Cabin Air Filter on Fiat Panda 3
Fiat Panda (2012-2026 / 319, MK 3) In this short and simple video, see how to replace the cabin air filter on a Fiat Panda third series. First, access from the front passenger side and…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos