Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Stop Light Switch on a Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Checks and maintenance

As seen in this tutorial, replacing the stop light switch on a Fiat 500 is an extremely simple and quick task. Often, the failure of this component is the main cause of various system malfunctions, such as the ESP and Hill Holder. To remove the switch, first ensure that the key is not in the ignition, then go under the dashboard on the driver's side and locate it: it is situated above the brake pedal. Once located, simply grasp it, pull it upwards, and simultaneously turn it counterclockwise. After disconnecting the connector, you can install the replacement by following the reverse procedure.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2022 / 312) In this tutorial, you will see how to replace the stop switch on the Fiat 500, a very simple and quick operation. The failure of this device is often…
Fiat 500 (2007-2021 / ) This video tutorial shows how to replace the brake pedal switch. The brake switch sends a signal to the ECU to activate the brake lights when braking…
Fiat 500 (2007-2021 / 312) The fuse box is located inside the cabin at the bottom of the passenger side glove compartment. The diagram is as follows: Right dipped beam supply F…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2022 - Why does the trunk of the Fiat 500C not open? Read answer
    • 500 2007-2022 - How much does the panoramic roof cost in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2014-2022 - In what position is the passenger compartment filter on the Fiat 500x? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer
    • 500 2014-2022 - What does the wording "Service expired" on the Fiat 500X mean? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos