Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stop Switch on a Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Checks and maintenance

First, enter the cabin. The button that activates the "Stop" lights is not located behind the brake pedal as one might think, but is positioned on the passenger side under the dashboard. To access the switch, remove the plastic cover by unscrewing the two screws present. Once you reach the switch, to remove it, simply disconnect the connector attached to it and unscrew the screw that secures it. To install the new switch, simply follow these steps in reverse, and you will have successfully replaced the brake light switch.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Stop Switch on the Fiat 500?
How to Replace the Stop Switch on the Fiat 500?
Fiat 500 (2007-2022 / 312) In this tutorial, you will see how to replace the stop switch on the Fiat 500, a very simple and quick operation. The failure of this device is often…
How to Replace the Stop Light Switch on a Fiat 500
How to Replace the Stop Light Switch on a Fiat 500
Fiat 500 (2007-2022 / 312) As seen in this tutorial, replacing the stop light switch on a Fiat 500 is an extremely simple and quick task. Often, the failure of this component i…
How to replace the stop bulb in a Fiat 500 L
How to replace the stop bulb in a Fiat 500 L
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you can see how to replace the stop bulb in a Fiat 500 L by following some simple steps that will help you work independently…

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2022 - Why does the trunk of the Fiat 500C not open? Read answer
    • 500 2007-2022 - How much does the panoramic roof cost in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2014-2022 - In what position is the passenger compartment filter on the Fiat 500x? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer
    • 500 2014-2022 - What does the wording "Service expired" on the Fiat 500X mean? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos