Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you replace the external door handle of the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2021
Part: Handle
Operation: How do you replace the external door handle of the Fiat 500?

In order to replace the external handle of the Fiat 500, you must first remove the internal panel of the door, loosening the screws near the internal handle and the window lifter button. In this way, the panel can be detached by accessing from the bottom: once the panel has been removed, the internal cover can be detached in order to unscrew the screws that fix the handle from the inside. By also unscrewing the bolt on the side of the door, the external handle can be removed from its housing and replaced with a new spare part.


Posted on 24 November 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - Why does the Fiat 500 door handle not work? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 handle? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos