Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the battery of a Fiat 500 1.3 multijet

Model: Fiat 500 - Years 2007-2021
Part: Battery

The video shows how to replace the battery of a Fiat 500 1.3 multijet. It is an operation that can be done without resorting to a mechanic and which takes half an hour. First, turn off the car and open the bonnet. The battery is located to the right of the engine block. Using a socket wrench with extension, unscrew the battery support strap and remove it. Open the tab of the negative terminal and remove it. With a 10 mm wrench, unscrew the bolt to be able to remove the positive clamp. Remove the old battery. Carry out the replacement and then the assembly operations as described above, but in reverse.

Posted on 19 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to change the glow plugs on the Fiat 500 L 1.3 Multijet
How to change the glow plugs on the Fiat 500 L 1.3 Multijet
Fiat 500 (2012-2023 / 500 L) Let's find out in this guide the main instructions that will allow us to disassemble and replace the glow plugs of the Fiat 500 L 1.3 Multijet. First…
How to replace the diesel filter of the Fiat 500 1.3 Multijet.
How to replace the diesel filter of the Fiat 500 1.3 Multijet.
Fiat 500 (2007-2022 / 312) Today's guide will show us the steps on how to dismantle and replace the diesel filter of the Fiat 500 1.3 Multijet, following the instructions below…
How to change the engine oil and oil filter of the Fiat 500 1.3 Multijet
How to change the engine oil and oil filter of the Fiat 500 1.3 Multijet
Fiat 500 (2007-2022 / 312) Let's see in this guide how to replace the engine oil and oil filter of the Fiat 500 1.3 Multijet, following these simple steps. First we lift the ca…

Other guides you may be interested in

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos