Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Steering Wheel on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Steering wheel

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the steering wheel on a Fiat Punto by following a few simple steps: the first thing to do is to purchase a new steering wheel to replace the damaged one. Disconnect the battery cables for safety (negative and positive terminals).

Get inside the vehicle and using a 5 mm Allen key, unscrew the three screws located at the back of the steering wheel.

Once the screws are removed, you can take out the airbag; now disconnect the airbag cable using a small flat-head screwdriver, lift the green connector, and then disconnect the horn cable as well. Remove the central cap to reveal the 24 mm nut, then take a 24 mm socket with a ratchet and unscrew this nut, holding the steering wheel steady while you do so. Once the nut is removed, pull the steering wheel towards you and pass the cables through the hole, being careful not to damage them during the process.

Now proceed to replace the old steering wheel with the new one.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today we will look at the instructions on how to disassemble and replace the steering wheel and its airbag on the Fiat Grande Punto and Punto Evo. Fi…
Fiat Punto (1999-2011 / MK 2, 188) How to replace the steering wheel of a Fiat Punto? Follow these simple steps for the replacement. Insert a screwdriver or bit into the side slots on …
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How do you remove the airbag from the steering wheel of a Fiat Grande Punto? Follow these steps: before removing the airbag from the steering wheel, …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos