Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you replace the water pump on the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2021
Part: Pump
Operation: How do you replace the water pump on the Fiat 500?

In order to replace the water pump on the Fiat 500, you need to remove the bulk parts located to the left of the engine block and the right front wheel, loosening the bolts and removing the relative wheel arch. In this way it will be possible to access the lateral part of the engine where the pulleys are located. By loosening the tensioner roller, it will be possible to remove the belt itself and therefore access the water pump by sliding it out of its housing. Once the old pump has been removed, it will be possible to insert a new one, also fitting all the other components.


Posted on 26 July 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2022 - Where is the water pump located on the Fiat 500? Read Answer
    • 500 2007-2023 - How does the fuel pump work on Fiat 500? Read Answer
    • 500 2012-2023 - What does the Fiat 500 L injection pump warning light indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos