Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to change the water pump of the Fiat 500 1.2

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Pump
Operation: How to change the water pump of the Fiat 500 1.2

In this video tutorial we will see how to disassemble and replace the water pump of the Fiat 500 1.2, following the instructions below. First of all, we open the bonnet of our car and begin to disassemble and remove the engine support of our car, by unscrewing the screws; so we keep the engine up on the low end. At this point, remove the timing cover and disconnect the service belt; we then remove the timing belt, taking the necessary references. We just have to unscrew the screws of the water pump, replace and reassemble everything!


Posted on 9 June 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - Where is the water pump located on the Fiat 500? Read Answer
    • 500 2007-2023 - How does the fuel pump work on Fiat 500? Read Answer
    • 500 2012-2023 - What does the Fiat 500 L injection pump warning light indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos