Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter of the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Air filter

See other generations:
Video tutorial

The air filter is a component located within the engine bay that, despite its very simple shape, is particularly important for maintaining optimal health of the entire engine. After several miles driven, the level of wear may require mandatory replacement.

To do this, simply follow these steps. Keep the engine off and lift the bonnet.

Right in front of you, there will be a large plastic component. Unscrew the three screws present and remove the lower part.

At this point, you will have access to the air filter, so remove it and replace it with the new model. Reposition the part removed earlier and re-screw the screws.

Finally, close the bonnet.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Air Filter on a Fiat Grande Punto
How to Replace the Engine Air Filter on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to proceed with replacing the engine air filter on a Fiat Grande Punto? Open the car door, pull up the engine compartment release lever located a…
How to Replace the Air Filter on a Fiat Grande Punto
How to Replace the Air Filter on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replacing the air filter on a Fiat Grande Punto. Open the car door, pull up the lever to open the engine compartment located at the bottom left of th…
How to Remove the Air Filter Installed on a Fiat Grande Punto
How to Remove the Air Filter Installed on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the air filter installed on a Fiat Grande Punto? Open the car door, pull up the engine compartment release lever located at the bottom …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos