Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Fiat 500?

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Timing belt

See other generations:
Video tutorial

To replace the timing belt on a Fiat 500, open the bonnet and access the left side of the engine block, where the pulleys and the belt are located. To remove the belt, loosen the nuts securing the central pins of the pulleys to reduce the tension, allowing the belt to be extracted from its housing.

Once removed, insert a new spare part by tightening the central pins of the pulleys and ensuring all installed parts are functioning.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Fiat 500?
How to Replace the Timing Belt on a Fiat 500?
Fiat 500 (2007-2024 / 312) Today, tackle the replacement of the timing belt on your Fiat 500. First, open the bonnet and remove the air filter assembly along with the engine co…
How and when to change the timing belt of the Fiat 500 1.2?
How and when to change the timing belt of the Fiat 500 1.2?
Fiat 500 (2007-2021 / 312) This guide provides instructions on how and when to change the timing belt of the Fiat 500 with a 1.2 engine. The timing belt for this type of engine…
Replacement of the timing belt of the Fiat 500 1.2
Replacement of the timing belt of the Fiat 500 1.2
Fiat 500 (2007-2024 / 312) Today we will see the guidelines for replacing the timing belt of the Fiat 500 1.2. First, we open the hood and start disassembling and removing the …

    Frequently Asked Questions

    • 500 2007-2024 - How often should the Abarth 500's timing belt be replaced? Read answer

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos