Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp of the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Headlight

See other generations:
Video tutorial

To replace the front headlamp of the Fiat Panda, loosen all the screws securing the components around the headlamp. You will need to loosen the screws fixing the inner wheel arch cover, the lower part of the bumper, and the grille at the front of the engine bay. This will allow you to move these parts and access the screws holding the headlamp.

By loosening these screws and disconnecting the connectors at the back, you can pull the headlamp from its housing and replace it with a new one; also, refit all the other parts you previously loosened.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Remove the Headlight Bulb on a Fiat Panda
How to Remove the Headlight Bulb on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Are the bulbs blown in the front headlight of your Fiat Panda? Here’s how to replace them. Lift the bonnet and secure it. Remove the cap covering the…
How to replace the front headlight of the Fiat Panda
How to replace the front headlight of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today we will explain how to replace the front headlight of the 2005 Fiat Panda. To replace the headlight, we need to open the front hood of the car …
How to Replace the Front Headlamp Bulb in Your Fiat Panda
How to Replace the Front Headlamp Bulb in Your Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replacing the front headlamp bulb in your Fiat Panda is very simple. To complete the task, follow the procedure outlined in this guide. First, buy a …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos