Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Croma
  6. : How to remove the radio on the Fiat Croma?

Fiat Croma - Video tutorial

Model: Fiat Croma MK 1 - Years 2005-2010
Part: Car stereo
Operation: How to remove the radio on the Fiat Croma?

As the video shows, disassembling a car stereo from a Fiat Croma is quite simple as it will be enough to remove it from its housing. If you do not have the particular tool shown in the video that greatly facilitates the operation, you can use four small screwdrivers that can enter the four small holes of the car radio. Insert each screwdriver into the hole. Once done, hold two screwdrivers with one hand, the other two with the other and pull lightly trying to 'yoke' until you have extracted the car radio. If you don't have the 4 screwdrivers you can use 4 small long screws and do the same movement.


Posted on 25 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos