Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on Fiat Croma

Model: Fiat Croma MK 1 - Years 2005-2010
Part: Service warning light

In this description, we will outline the essential steps to reset the service light for the routine maintenance of a Fiat Croma, following the instructions below. First, get inside the car and turn on the ignition: at this point, press the accelerator pedal and, while holding it down, press and release the brake pedal six times, as shown in the video. Then release everything and turn off the ignition; next, turn it back on and check that the reset operation has been successful, as demonstrated in the video!

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Fiat Croma?
How do you reset the Service light on the Fiat Croma?
Fiat Croma (2005-2010 / MK 1) In order to reset the Service light on the Fiat Croma, you need to turn on the instrument panel by inserting the ignition key into the ignition switc…
How to Reset the Service Light on the Fiat Croma
How to Reset the Service Light on the Fiat Croma
Fiat Croma (2005-2010 / MK 1) In the second part of the video, we will see the instructions that will allow us to reset the service light for the regular maintenance oil change on…
In the Fiat Croma, how do you reset the Service light?
In the Fiat Croma, how do you reset the Service light?
Fiat Croma (2005-2010 / MK 1) Let's delve into the topic of the service, specifically the oil change and engine filter, concerning the Fiat Croma, which is the vehicle featured in…

    Frequently Asked Questions

    • Croma 2005-2010 - How to reset the Fiat Croma service light? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos