Do it yourself
| ||||
|
Fiat Croma - Video tutorial
Model: Fiat Croma
MK 1
- Years 2005-2010 In this guide, let's briefly see how to reset the service light, using diagnostic software, on the Fiat Croma, but also on all the other models of the manufacturer. First of all, let's connect our instrument to the OBD socket of our car, turning on the ignition to let the software communicate with the control unit; then we go to select the brand, model and type of engine, as shown in the video. At this point let's go to the service item and carry out the indicated procedure, waiting for the light to reset from the instrument panel!
Posted on 28 December 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |