Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Ducato
    4. : How do you remove the front wheel of the Fiat Ducato?

Fiat Ducato - Video tutorial

Model: Fiat Ducato X250 - Years 2006-2014
Part: Wheel
Operation: How do you remove the front wheel of the Fiat Ducato?

In order to replace the front wheel of the Fiat Ducato, the jack supplied must be positioned so that the corresponding wheel does not touch the ground. At this point, with the socket wrench, you will have to unscrew the bolts that secure the wheel to its housing so that it can be completely removed and replaced with the spare wheel. The latter must be removed from the lower platform of the vehicle by unscrewing the corresponding bolt using another of the keys supplied. At this point it will be possible to position it on the hub and fix it with the appropriate bolts.


Posted on 1 October 2022 by ScegliAuto



Guide to disassembling the front bumper of the Fiat Ducato
Fiat Ducato (2006-2014 / X250) Let's see in this short and simple guide how to remove the front bumper of the Fiat Ducato, following the instructions below. First of all we open th
How to remove the airbag of a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before we can start, to work in total safety, we will need to disconnect the battery of our Fiat Ducato. Let's start by sitting in the driver's seat.
How do you replace the timing belt on the Fiat Ducato 2.8 JTD?
Fiat Ducato (2002-2006 / ) In order to replace the timing belt of the Fiat Ducato 2.8 JTD, the vehicle must be lifted so that the front right wheel and the relative wheel arch

    Frequently Asked Questions

    • Ducato 2006-2014 - Where is the spare wheel on the Fiat Ducato located? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos