Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the handle of the trunk of the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Handle
Operation: How to remove the handle of the trunk of the Fiat 500?

Is the handle of the trunk of our Fiat 500 damaged or do we want to replace it with a newer one or of a different color? Thanks to this video we can learn how to do it without spending money in the workshop. First we need to open the tailgate of the trunk so that we can remove the clips on the panel and unhook the panel from its seat. At this point we can go to disconnect the electrical connector that powers the lights and unscrew the four bolts indicated in the video. Now we just have to unhook the clip of the handle and extract the latter by pulling it from the outside.


Posted on 8 October 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2022 - Why does the Fiat 500 door handle not work? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 handle? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos