Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Engine Service Light on Fiat 500

Model: Fiat 500 - Years 2007-2021
Part: Service warning light

Insert the key and turn on the ignition; the "oil change service" light is on. Press the accelerator pedal fully down, then press the brake pedal fully down seven times. After that, hold both pedals down for 60 seconds. Then, release the brake pedal first, followed by the accelerator pedal. At this point, turn off the ignition and remove the key. Wait at least 60 seconds before reinserting the key and turning on the ignition again. After this procedure, the "oil change service" indicator will have turned off.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you perform the service and reset the service light in the Fiat 500 X?
How do you perform the service and reset the service light in the Fiat 500 X?
Fiat 500 (2014-2022 / 500 X) In this short video guide, we see the essential steps and tools to use for a maintenance service of the Fiat 500, including changing the engine oil, …
How to Reset the "Service" Light on a Fiat 500
How to Reset the "Service" Light on a Fiat 500
Fiat 500 (2012-2023 / 500 L) Before you can start the reset, ensure that the service has been carried out, then sit in the driver's seat of your Fiat 500. Begin by activating the…
How to reset the service light on the Fiat 500 L
How to reset the service light on the Fiat 500 L
Fiat 500 (2012-2023 / 500 L) The service light reset, related to the car service, on a Fiat 500 L car, follows a very simple and quick procedure to be carried out independently. …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos