Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Horn from the Old Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Steering wheel

Open the door and sit in the driver's seat. The horn switch is located under the panel with the "FIAT" logo at the centre of the two-spoke steering wheel. Use a sharp object to pry it towards you to unlock the horn cover, taking care not to break the retaining clips during removal. Under the cover, you will find the horn plate connected with a power connector to the dashboard. Disconnect the connector and take the new horn, then reconnect the power connector. Refit the horn cover and position it back at the centre of the steering wheel.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Horn from a Fiat Panda
How to Remove the Horn from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the front bonnet of your Fiat Panda. Begin by unscrewing and removing the screws that secure the grille at the front of the car…
How to Remove the Horn from a Fiat Panda
How to Remove the Horn from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can begin, open the front bonnet of your Fiat Panda. Start by unscrewing and removing the screws that secure the front mask, then remove t…
How to check the horn fuse in the Fiat Panda 169
How to check the horn fuse in the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) To check the horn fuse in the Fiat Panda 169 (produced between 2003 and 2012), you can follow these steps: ### 1. **Locate the fuse box** - **Interio…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos