Do it yourself
Frequently asked questions about cars and motorcycles

Timing Belt Replacement

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Timing belt

Replacing the timing belt is a task that is as complex as it is necessary.

The timing belt is one of the most important components of the engine and is responsible for synchronising the movement of the crankshaft with that of the camshaft, which in turn regulates the opening and closing of the valves.

Failure to replace the belt at scheduled intervals can lead to breakage, with serious consequences for the engine; for example, failure to open the valves can cause the piston to collide with them, breaking them or breaking itself.

Since replacing the timing belt is a rather complex operation that requires appropriate tools to be done correctly, it is advisable to have it done only at a garage.

However, if you feel like a skilled mechanic, this video shows the various stages of the operation performed on a Fiat Punto with a mk2 8V engine.

Updated on 1 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Fiat Punto (1999-2011 / MK 2, 188) In this guide, follow the instructions to remove and replace the timing belt on the Fiat Punto 1.9 JTD. First, lift the vehicle and remove the front …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The main instructions provided in this guide will show us how to disassemble and replace the timing belt of the Fiat Grande Punto 1.4. First, let's o…
Fiat Punto (1999-2011 / MK 2, 188) Before starting, raise the front of your Fiat Punto 1.2. Begin by removing the right front wheel. Next, detach and move the inner wheel arch by unscr…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos