Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light on a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Service warning light

If the engine oil light has come on, the first thing to do is change the engine oil and filters. Next, get into your vehicle and sit in the driver's seat. Insert the key and turn it to switch on the instrument panel; there's no need to start the engine. Fully press the accelerator pedal and simultaneously press the brake pedal seven times; on the seventh time, release only the brake pedal and keep the accelerator pressed for one minute, then release the pedal and turn off the ignition. Wait another minute before turning the ignition back on.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Fiat Tipo?
How to Reset the Service Light on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To reset the Service light on a Fiat Tipo, you must first change the oil and the corresponding filter as indicated in the tutorial. Next, enter the c…
Reset service light (engine oil) with Multiecuscan on Fiat Tipo 356
Reset service light (engine oil) with Multiecuscan on Fiat Tipo 356
Fiat Tipo (2016-2026 / 356, 357, 358) Let’s discover the steps to reset the service light for the routine maintenance oil change on a Fiat Tipo 356 using the Multiecuscan diagnostic tool.…
How to Reset the Service Light on the Fiat Tipo
How to Reset the Service Light on the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) In this short video, see how to reset the service light for routine maintenance of the oil change on the Fiat Tipo, as well as on all other vehicles …

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How to remove the oil change warning light in the Fiat Tipo? Read answer
    • Fiat Tipo 2016-2026 - How do you reset the Fiat Tipo service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos