Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram for the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Fuse box

The fuse boxes of the vehicle are located in the cabin just below the steering column, protected by a plastic panel, and in the engine compartment near the battery. The diagram for the cabin fuse box is as follows: F47 Front electric window (driver side); F48 Front electric window (passenger side); F36 Power supply for Uconnect™ system, air conditioning system, EOBD system, USB/AUX port, steering wheel controls; F38 Dead Lock device (Driver side door unlock for versions/markets where applicable) / Door unlock / Central locking / Electric tailgate unlock; F43 Windscreen washer pump; F33 Rear left electric window; F34 Rear right electric window.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Diagram for the 2016 Fiat Tipo
Fuse Diagram for the 2016 Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) This video shows the location of the fuse boxes for the 2016 Fiat Tipo along with the fuse diagram for each box. To consult the site in Italian at yo…
What is the Fuse Diagram for the Fiat Tipo?
What is the Fuse Diagram for the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) In this video, you can see where the fuse boxes are located in the Fiat Tipo and their respective diagrams, to consult if you need to check the fuses…
Fiat Tipo Fuse Diagram
Fiat Tipo Fuse Diagram
Fiat Tipo (1988-2000 / MK 1) This video illustrates the fuse diagram for the first series Fiat Tipo, produced between 1993 and 1997. The video creator has made a simple and intui…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos