Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Boot of a FIAT 500 if it is Stuck or the Number Plate Light is Not Working

Model: Fiat 500 312 - Years 2007-2022

If the boot of your FIAT 500 is stuck, there is an internal release button. Enter from the inside and, with the boot in front of you, find it on the left side of the latch. Now that the boot is open, locate the cable connections, which are all gathered in a rubber sheath ending with a pressure-fit cap in the bodywork that requires some force to remove. The main issue with the FIAT 500 boot is the severing of the wires that allow it to open; this also causes the number plate light to malfunction. Join the severed wires together and cover them with insulating tape, reinserting them into their housing. Close the boot and check that the problem has been resolved.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2024 / 312) When the rear hatch of the Fiat 500 is not functioning properly, it is likely that the wiring inside is damaged: therefore it will be necessary to re…
Fiat 500 (2012-2023 / 500 L) In the Fiat 500L, it may happen that the tailgate gets stuck, for example due to a problem with the unlock button or the lock actuator. In these case…
Fiat 500 (2007-2022 / ) This tutorial demonstrates how to open the tailgate of a Fiat 500 from the inside, a quick and simple operation to perform if the corresponding contr…

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer
    • 500 2007-2024 - What happens when the "uconnect" on Fiat 500 expires? Read answer
    • 500 2007-2024 - Where is the jack on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos