Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard from the Fiat 500x

Model: Fiat 500 500 X - Years 2014-2022
Part: Dashboard

To remove the dashboard and the glove compartment from the vehicle, follow these instructions as described in the video. First, you will need a plastic trim tool, as the entire dashboard on the right side of the steering column and its left side is clipped in. Gently pry around the profile of the dashboard to release the rear clips. To remove the glove compartment, lift the two rubber profiles at the top and bottom; beneath them are screws that need to be removed to extract the glove compartment.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Glove Compartment of a Fiat 500x
Fiat 500 (2014-2022 / 500 X) In this video, we will see how to remove the front glove compartment of a Fiat 500x (located at the top of the dashboard). Open the glove compartment…
Removing the Radio from a Fiat 500X
Removing the Radio from a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Do you want to remove the radio from a Fiat 500X to connect other cables? Follow these steps: Remove the radio trim from the dashboard, then use a sc…
How to replace the cabin air filter of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In the following guide you will find the description of all the various steps that you need to follow to complete the replacement of the cabin air fi…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos