Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram for Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Fuse box

In this vehicle, as in many others, the fuses are contained within two boxes. The first is located in the engine bay on the right side of the battery, while the second is found in the cabin, at the lower part of the dashboard on the left side near the door. Below is the diagram of the box located in the cabin with the corresponding amperage: F13 five +15 (*) headlight adjustment; F31 five +15 (*) ignition switch with engine start inhibition; F36 ten +30 (**); F37 7.5 +15 (*) brake pedal switch (NO); F38 twenty central locking of the doors; F43 twenty two-way windscreen washer pump; F47 twenty front electric window (driver's side); F48 twenty front electric window (passenger side).

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Diagram and Positioning of the Internal Fuses in a Fiat Panda
Diagram and Positioning of the Internal Fuses in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today, we will discover information regarding the positioning and diagram of the internal fuse box in a Fiat Panda. First, open the driver's side fro…
Diagram and Location of the Fuse Boxes on the Fiat Panda
Diagram and Location of the Fuse Boxes on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This guide briefly outlines the steps to locate the fuse boxes and their diagram for the Fiat Panda. First, get into the vehicle to find the internal…
Fuse box diagram of the Fiat Panda.
Fuse box diagram of the Fiat Panda.
Fiat Panda (2012-2023 / ) In this article, with the support of the video, we will see the correct fuse diagram of the Fiat Panda. The diagrams are both of the fuse box in the …

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2021 - What is the Fiat Panda brake light fuse? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos