Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Sedici
    4. : How to install a radio with 2 DIN monitor on a Fiat Sedici

Fiat Sedici - Video tutorial

Model: Fiat Sedici MK 1 - Years 2005-2014
Part: Car stereo
Operation: How to install a radio with 2 DIN monitor on a Fiat Sedici

To install a car radio with 2 DIN monitor on a Fiat Sedici, we must first remove the car radio that we have mounted on the car. Let's equip ourselves with a plastic spatula to remove the frames, and then extract the car radio, disconnecting the plugs. To apply the GPS antenna, we must pass the cable, first from inside the cavity where we will mount the screen, then we will pass it through the glovebox and finally we will make it emerge from the pillar that leads to the roof of the car, so as to place it behind the mirror, which is its designated place. When the wire is in place, we can put all the parts back together that we had to take off. Now let's think about the radio. We attach the pins and put it back in its place, then we can reposition the bezels. Work completed.


Posted on 30 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos