Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Bulb Connectors on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Light bulb

If your Fiat Punto is a bit old, it may be that your headlights are not shining as brightly anymore, and the problem may not be the bulbs but the connectors that are now burnt and corroded. The best thing you can do is to change them, and in this video, you will see how to do it. First, disconnect the negative terminal of the battery to ensure you don’t get any annoying "shocks" while working. Cut the wires, get some heat-shrink tubing (if you want to do a good job) or insulating tape, then solder the new connectors to the electrical wire, protect it with tape (or tubing), and you can reattach the bulb holder. Now the bulb will shine brightly, as it was previously losing power due to the damaged connector.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Headlight Bulbs on a Fiat Punto
How to Change the Headlight Bulbs on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Change the bulbs in the front headlight of a Fiat Punto: open the bonnet by pulling the lever located at the bottom right of the dashboard, and secur…
How to Replace the Bulbs of the Rear Light on a Fiat Punto Evo
How to Replace the Bulbs of the Rear Light on a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Replace the bulbs of the rear light on a Fiat Punto Evo. Let's see how to remove the light and replace the bulbs: open the boot lid, unscrew the secu…
How to Replace the Third Brake Light Bulb on a Fiat Grande Punto?
How to Replace the Third Brake Light Bulb on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the third brake light bulb on a Fiat Grande Punto, lift the tailgate of the boot so you can detach the third brake light housing from the …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos