Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Connector on a Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Tail light

In this video tutorial, you will see how to replace the rear light connector on a Fiat Panda 169. If you notice that the brake light and indicator illuminate together, it is likely a poor connection, or the light connector may be burnt out. To replace the connector, purchase a new one from an auto parts dealer, or you can find a used but functional one at a scrapyard. Remove the rear light using a cross-head screwdriver; once the rear light is removed, use a flat-head screwdriver to detach the connector from its housing (push the clip inwards). After disconnecting the connector, check if the contacts are burnt; if the external connector contacts are burnt, it is advisable to replace the connector. Connect the wires one by one, following the diagram as shown in the video; it is also recommended to use connectors to cover the wires after connecting them. Once all the wires are joined, connect the connector back into its housing and reassemble the rear light.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light in a Fiat Panda 169
How to Replace the Rear Light in a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, see how to replace the rear light in a Fiat Panda 169: the first step is to purchase a rear light from an authorised car part…
Replacement of the rear taillight on a Fiat Panda
Replacement of the rear taillight on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this very useful video tutorial, we are shown how to replace the rear taillight of a Fiat Panda, model 169. We begin the replacement procedure by …
How to Remove and Replace the Third Brake Light on a Fiat Panda 169
How to Remove and Replace the Third Brake Light on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Today, you will see the instructions that will allow you to remove and replace the third brake light, or replace the bulbs, on a Fiat Panda 169, seco…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos