Do it yourself
Frequently asked questions about cars and motorcycles

Location of the Internal Fuse Box and OBD Port of the Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Fuse box

In today's tutorial video, you will learn how to locate the internal fuse box and the OBD port of the Fiat Ducato by following the instructions below. First, get inside the vehicle on the driver's side and start unscrewing the screws that secure the cover located to the left of the steering wheel using a crosshead screwdriver; you will find the fuse box and the OBD port inside, as shown in the video. The external fuse box is located in the engine compartment next to the battery; use the owner's manual to find the fuse diagram!

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Ducato (2014-2026 / X290) To locate the OBD port of your Fiat Ducato, you must follow the few simple steps described in this new guide dedicated to you. First, you need to rea…
Fiat Ducato (2006-2014 / X250) To locate the OBD port on your 2014 Fiat Ducato, carefully follow the steps described in this new mini guide. First, reach the driver's seat and remo…
Fiat Ducato (2006-2014 / X250) The Fiat Ducato campers also feature a diagnostic port, commonly known as the OBD port. On Fiat Ducato models produced from 2006 to 2014, the OBD por…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2006-2014 - Where are the fuses located in the Fiat Ducato? Read answer
    • Ducato 1993-2016 - Where is the alternator fuse located on the Fiat Ducato? Read answer
    • Ducato 2006-2014 - Where is the Fiat Ducato starter relay located? Read answer
    • Ducato 2014-2026 - Where is the fuse of the Fiat Ducato license plate lights located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos