Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Blue&Me Control Unit on the Fiat Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Control unit

To replace the Blue&Me control unit on the Fiat Punto, open the glove compartment on the passenger side: once the compartment is open, loosen the screws securing it in place so it can be fully removed. Behind the compartment, locate the Blue&Me control unit, which can then be freed from its mounting screws and disconnected from the power cables; at this point, insert the new control unit, connecting and securing it properly in its housing.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Update the Blue & Me System in a Fiat Punto
How to Update the Blue & Me System in a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This video describes how to update the Blue & Me system of the radio in a Fiat Punto. Go to the Blue & Me website on your PC and download the file fo…
How to Replace the ECU on a Fiat Punto 188
How to Replace the ECU on a Fiat Punto 188
Fiat Punto (1999-2011 / MK 2, 188) To replace the engine management ECU on a Fiat Punto, open the bonnet to access the engine bay: here you will need to disconnect the battery and remo…
Replacing the Timing Chain of the Fiat Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide outlines the main steps to remove and replace the timing chain of the Fiat Grande Punto 1.3 MultiJet, as well as the Fiat Panda and Fiat 5…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the Blue & Me control unit located on Fiat Grande Punto Evo? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos