Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
169, MK 2
- Years 2003-2012 In our new mini-guide dedicated to the Fiat Panda Mk2 we are going to describe a very simple and affordable method for everyone that will allow you to manually reset the oil warning light at no cost and in a completely autonomous way. First insert the key, turn it to position one and turn on the ignition. Immediately afterwards, hold down the accelerator pedal and simultaneously press the brake pedal eight times. When finished, hold down the accelerator pedal for one minute. Switch the ignition off and hold the accelerator pedal down again for another minute and you're done.
Posted on 5 June 2023 by ScegliAuto
This video is currently unavailable
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.041
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |