Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil service warning light in Fiat Toro?

Model: Fiat Toro MK 1 - Years 2016-2024
Part: Service warning light

In this tutorial we can see how to reset the engine oil service light in the Fiat Toro. Before carrying out this quick and easy operation, make sure you have completed all the required maintenance work. We start by inserting the key but leaving it in the initial position, then we fully press the accelerator pedal and at the same time we turn on the instrument panel. Once this is done, always keeping the accelerator pressed, press the brake 5 consecutive times. Finally, we release each pedal, restart the vehicle and check that the procedure has been done correctly.

Posted on 23 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light of the Fiat Toro?
How do you reset the Service light of the Fiat Toro?
Fiat Toro (2016-2024 / MK 1) It will be possible to reset the Service light on the instrument panel of the Fiat Toro by inserting the ignition key into the ignition switch, so th…
How do you reset the Service light on the Fiat Toro?
How do you reset the Service light on the Fiat Toro?
Fiat Toro (2016-2024 / MK 1) To reset the Service light of the Fiat Toro, you need to insert the ignition key into the block, so that it is possible to turn on the instrument pan…
How to reset the engine oil light on Fiat Toro
How to reset the engine oil light on Fiat Toro
Fiat Toro (2016-2024 / MK 1) In this video tutorial we can see how to reset the oil light on a Fiat Toro. When the oil light comes on, the first thing you need to do is go and ch…

Other guides you may be interested in

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos