Do it yourself
Frequently asked questions about cars and motorcycles

How to change the engine oil and filter on the Fiat 500 L

Model: Fiat 500 500 L - Years 2012-2023
Part: Engine oil

To perform the oil and filter change on the Fiat 500L, work with the vehicle on a level surface and with the engine warm. Turn off the engine, open the hood, and prepare a large container for the used oil. If you need to work from underneath, safely lift the car before accessing the oil pan. From underneath, locate the oil pan drain plug and position the container. Loosen the plug with the correct tool and allow the oil to drain completely. Once the draining is finished, replace the plug with its seal in good condition and tighten it without excess. Next, move on to the oil filter, which on this engine is of the cartridge type located in the engine compartment. Unscrew the cover of the filter holder, remove the old cartridge, and replace the cover seals if provided, lightly lubricating them with clean oil. Insert the new cartridge and screw the cover back on securely. At this point, pour the new oil from the upper filler neck, adding it gradually. Start the engine for a few seconds, turn it off, and wait a few minutes, then check the level and adjust it if necessary. Conclude by checking that there are no leaks from the drain plug or the filter holder.

Posted on 19 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2024 / 312) Do you want to replace the oil and filter on a Fiat 500? Follow these steps: lift the bonnet and secure it. Raise the car on a column lift; unscrew t…
Fiat 500 (2007-2024 / 312) To replace the engine oil in a Fiat 500, loosen the drain plug located at the bottom of the engine bay: once this plug is loosened, you can let all t…
Fiat 500 (1957-1975 / Epoca) Briefly, we will see the instructions that will allow us to change the engine oil on the classic Fiat 500. First, open the rear engine cover and star…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos