Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter of the Fiat 500 1.3 Multijet

Model: Fiat 500 312 - Years 2007-2024
Part: Engine oil

To perform the routine maintenance service (engine oil and oil filter change), you will need to lift the vehicle; let's see the procedure on the Fiat 500. First, drain the engine oil by unscrewing the bolt on the sump, allowing the oil to flow into a container for about ten minutes; then, unscrew the oil filter cartridge using the appropriate tool and replace it with a new one, as shown in the video. Now, unscrew the filler cap and top up with new engine oil, checking the level with the dipstick!

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement on a Fiat 500 1.3 MultiJet
Engine Oil and Oil Filter Replacement on a Fiat 500 1.3 MultiJet
Fiat 500 (2007-2021 / 312) In today's tutorial video, you will see step-by-step instructions for performing the routine maintenance oil change on a Fiat 500 1.3 MultiJet. First…
How to Change the Engine Oil and Oil Filter of the Fiat 500 1.3 MultiJet
How to Change the Engine Oil and Oil Filter of the Fiat 500 1.3 MultiJet
Fiat 500 (2007-2022 / 312) .. This guide explains how to replace the engine oil and oil filter of the Fiat 500 1.3 MultiJet, following these simple steps... …
How to Replace the Oil Filter on the Fiat 500L 1.3 Multijet
How to Replace the Oil Filter on the Fiat 500L 1.3 Multijet
Fiat 500 (2012-2021 / ) As shown in the video, to change the oil filter in your Fiat 500 1.3 Multijet, you must first choose the correct filter. There are two types availabl…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos