Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement on a Fiat 500 1.3 MultiJet

Model: Fiat 500 312 - Years 2007-2021
Part: Oil filter

In today's tutorial video, you will see step-by-step instructions for performing the routine maintenance oil change on a Fiat 500 1.3 MultiJet. First, lift the vehicle and remove the oil drain bolt located under the engine, allowing the old oil to drain into a container for about ten minutes. Then, remove the oil filter cartridge located at the bottom of the engine bay by unscrewing it with a socket wrench. At this point, replace the filter with a new one, ensuring the gasket is correctly positioned, and pour in the new oil!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter of the Fiat 500 1.3 MultiJet
How to Change the Engine Oil and Oil Filter of the Fiat 500 1.3 MultiJet
Fiat 500 (2007-2022 / 312) This guide explains how to replace the engine oil and oil filter of the Fiat 500 1.3 MultiJet, following these simple steps. First, lift the vehicle …
How to Replace the Oil Filter on the Fiat 500L 1.3 Multijet
How to Replace the Oil Filter on the Fiat 500L 1.3 Multijet
Fiat 500 (2012-2021 / ) As shown in the video, to change the oil filter in your Fiat 500 1.3 Multijet, you must first choose the correct filter. There are two types availabl…
How to Replace the Engine Oil and Oil Filter of the Fiat 500 1.3 Multijet
How to Replace the Engine Oil and Oil Filter of the Fiat 500 1.3 Multijet
Fiat 500 (2007-2024 / 312) To perform the routine maintenance service (engine oil and oil filter change), you will need to lift the vehicle; let's see the procedure on the Fiat…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2012-2023 - Where is the Fiat 500 L oil filter located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos