Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on the Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Oil filter

See other generations:
Video tutorial

Changing the oil filter and engine oil on the Fiat Ducato is a straightforward task that can be performed independently, thanks to this brief video tutorial that explains the procedure step by step. Start by opening the bonnet and removing the oil cap. Next, using an Allen key, remove the oil sump plug.

Allow the oil to drain, and in the meantime, remove the oil filter. Refit the oil sump plug and insert 6 litres of new oil. Replace the oil filter.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter in the Fiat Ducato
How to Change the Engine Oil and Oil Filter in the Fiat Ducato
Fiat Ducato (2014-2026 / X290) Below is the procedure to perform routine maintenance by changing the engine oil and oil filter in the Fiat Ducato. First, drain the engine oil by un…
How to Replace the Oil Filter and Engine Oil on a Fiat Ducato Multijet
How to Replace the Oil Filter and Engine Oil on a Fiat Ducato Multijet
Fiat Ducato (2014-2026 / X290) Replacing the oil filter on a Fiat Ducato Multijet is a straightforward task that you can do yourself. To facilitate the oil draining from the sump, …
How to Change the Engine Oil on Fiat Ducato
How to Change the Engine Oil on Fiat Ducato
Fiat Ducato (2006-2014 / X250) Change the used engine oil on your Fiat Ducato, here’s what to do. Raise the Ducato on a column lift, unscrew the oil sump bolt with a socket wrench,…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos