Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the TPMS Control Unit Located on the Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Tire pressure warning light

In this video, find out where the TPMS control unit is located on the Fiat 500: TPMS stands for Tyre Pressure Monitoring System. As the name suggests, the tyre pressure monitoring system is more than just a single part. The TPMS involves a valve, a sensor, and a control unit, and not all TPMS systems are configured the same way. In the case of the Fiat 500, the control unit is located under the wheel arch lining on the passenger side. You will need to remove the screws from the rear of the wheel arch to access the desired component.

Updated on 24 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Blue&Me Control Unit in the Fiat 500?
How to Replace the Blue&Me Control Unit in the Fiat 500?
Fiat 500 (2007-2021 / 312) To replace the Blue&Me control unit in the Fiat 500, you need to remove the inner door panel by loosening the appropriate fixing screws and disconnec…
How to replace the Blue&Me unit of the Fiat 500 Abarth
How to replace the Blue&Me unit of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Today's main steps will show us how to disassemble and replace the Blue&Me multimedia system control unit of the Fiat 500 Abarth. First of all, we wi…
What is the Blue and Me system of the Fiat 500 Abarth?
What is the Blue and Me system of the Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) The Blue and Me control unit is installed on Fiat 500 Abarth vehicles and Fiat Grande Punto vehicles. The main issues with this control unit concern …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2021 - What does the Fiat 500 tire pressure warning light mean? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos