Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on a Fiat Tipo?

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Service warning light

To reset the oil warning light on a Fiat Tipo, turn the key in the ignition switch to power on the instrument cluster. Once the instrument cluster is on, press the accelerator pedal and then press the brake pedal seven times. After the last time you press the brake pedal, hold it down for about one minute. At this point, release both pedals and turn off the instrument cluster. When you turn it back on, which should be done after waiting at least another minute, you will notice that the oil warning light has been reset.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on the Fiat Tipo 1.6 MultiJet?
How to Reset the Oil Light on the Fiat Tipo 1.6 MultiJet?
Fiat Tipo (2016-2026 / 356, 357, 358) To reset the oil light on the Fiat Tipo 1.6 MultiJet, turn the key in the ignition switch to power on the instrument cluster: after it powers on, pre…
How to Reset the "TPMS" Light on a Fiat Tipo
How to Reset the "TPMS" Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, check and, if necessary, adjust the pressure in the tyres, then sit in the driver's seat of your Fiat Tipo. Start the engine. Next,…
How to Reset the Engine Oil Light on a Fiat Tipo
How to Reset the Engine Oil Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) If the engine oil light has come on, the first thing to do is change the engine oil and filters. Next, get into your vehicle and sit in the driver's …

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How to remove the oil change warning light in the Fiat Tipo? Read answer
    • Fiat Tipo 2016-2026 - How do you reset the Fiat Tipo service warning light? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos