Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn Off the Oil Warning Light on a Fiat Ducato 2020

Model: Fiat Ducato X290 - Years 2014-2026
Part: Service warning light

The following video shows the procedure to reset the service light on the Fiat Ducato. This procedure is necessary when the oil warning light is on or flashing. The first step is to turn the ignition on and press the accelerator pedal all the way down, keeping it pressed. Next, press and release the brake pedal seven times while the accelerator pedal is pressed. At this point, continue to hold the accelerator pedal for 60 seconds. Then, turn off the vehicle by turning the ignition key and wait for another 60 seconds. This will turn off the oil warning light.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Fiat Ducato
How to Replace the Front Headlight Bulb on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) These brief and simple steps will guide you through the process of removing and replacing the front headlight bulb on a Fiat Ducato. First, open the …
How to turn off the AdBlue light on a Fiat Ducato?
How to turn off the AdBlue light on a Fiat Ducato?
Fiat Ducato (2014-2026 / X290) To turn off the AdBlue light on a Fiat Ducato, you can use a diagnostic device by connecting it to the OBD (On-Board Diagnostics) port of the vehicle…
Replacement of the position light lamp of the Fiat Ducato X250
Replacement of the position light lamp of the Fiat Ducato X250
Fiat Ducato (2006-2014 / X250) Let's see how to replace the position light bulb of the Fiat Ducato, in case it burns out. Open the front hood and position yourself near the headlig…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos