Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Door Handle on the Fiat 500

Model: Fiat 500 - Years 2007-2022
Part: Handle

In this guide, we will see how to remove and replace the front door handle on the Fiat 500, following the instructions provided below. First, open the front door and start removing the door panel by unscrewing the panel screws; then unclip the internal mechanism of the handle by unscrewing the fixing screw to first remove the lock cylinder and then the handle itself, as shown in the video. Now install the new handle of the correct type, following the video to the end!

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2014-2022 / 500 X) Today we will discover the steps that will allow us to disassemble and replace the internal handle of the front door of the Fiat 500X. First of all, …
Fiat 500 (2007-2022 / ) In this guide, you will find instructions to remove the front door panel and how to subsequently detach the external handle of the Fiat 500. First, o…
Fiat 500 (2007-2022 / ) Today, we will go through the steps to remove and replace the external door handle of the front door on the Fiat 500. First, open the front door and …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos