Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Seicento
    4. : How to change the oil in a Fiat Seicento?

Fiat Seicento - Video tutorial

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Engine oil
Operation: How to change the oil in a Fiat Seicento?

In this tutorial, we can see how to replace the oil in the Fiat Seicento, a very simple operation. Before proceeding, we wait for the engine to be completely cold in order to work safely. We start by placing a container underneath the vehicle, then we unscrew the drain plug and let all the oil in the engine come out. Afterwards, we grab the filter located in the front area, unscrew it, and insert the replacement. At this point, we can tighten the drain plug, open the top filling cap, and add the necessary amount of oil.


Posted on 21 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Seicento 1998-2010 - What is the right amount of engine oil for the Fiat Seicento? Read Answer
    • Seicento 1998-2010 - How much engine oil is required to top up the Fiat Seicento 1.1? Read Answer
    • Seicento 1998-2010 - What is the right amount of engine oil for the Fiat Seicento? Read Answer
    • Seicento 1998-2010 - How many liters of engine oil do you need in the Fiat 600? Read Answer
    • Seicento 1998-2010 - What is the right amount of engine oil for the Fiat 600? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos