Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install LED Lights in the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Light bulb

See other generations:
Video tutorial

In today's video, you will learn how to install LED lights in the front headlights of the Fiat Panda. First, ensure the vehicle is cold, as you will be working in the engine bay. Open the bonnet and remove the rubber cover caps.

Disconnect the clip and the power connector, then remove the bulbs. Now, you can insert the new units, fitting them to the shape of the headlight and attaching the new covers; these will have vents to allow the new bulbs to cool.

Complete the job.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to Install LED Headlights on the Fiat Panda
How to Install LED Headlights on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In today's video, you will see how to install LED headlights on the Fiat Panda currently available, specifically the 312 version. First, it is recomm…
How to Replace the Dipped Beam Bulbs in a Fiat Panda
How to Replace the Dipped Beam Bulbs in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This short video will show you how to remove the old H4 bulbs for the dipped beams in your Fiat Panda and replace them with new bulbs. This is a simp…
How to Remove the Air Vent Knobs on a Fiat Panda
How to Remove the Air Vent Knobs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How do you change the bulbs or LEDs for the illumination of the manual air conditioning knobs on a Fiat Panda? Follow this guide. Remove the air vent…

    Frequently Asked Questions

    • Panda 2003-2012 - How many reversing lights are there on the Fiat Panda? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos