Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan in a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
Video tutorial

Replacing the cabin fan in a Fiat Punto is an extremely simple and quick operation. Let's see how to proceed in this tutorial.

First, ensure that the key is not in the ignition, then go to the passenger seat, position yourself under the glove compartment, and locate the fan. Next, unscrew the two fixing screws with a cross-head screwdriver, pull the fan out of its housing, and disconnect the power connector.

Once done, insert the replacement and follow the reverse procedure to reassemble everything.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Cabin Fan of the Fiat Punto Evo
Guide to Replacing the Cabin Fan of the Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this guide, we will look at the main instructions on how to disassemble and replace the cabin fan on the Fiat Punto Evo, as well as the Grande Pun…
How to Replace the Cabin Fan Resistor in a Fiat Punto
How to Replace the Cabin Fan Resistor in a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the cabin fan in a Fiat Punto, you need to completely detach the carpet located under the glove compartment on the passenger side. Once th…
How do you replace the cabin fan resistor of the Fiat Punto?
How do you replace the cabin fan resistor of the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) It will be possible to replace the cabin fan resistor of the Fiat Punto by loosening the screws that secure the trim panel located below the glove co…

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos