Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Regulator Knob on the Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Checks and maintenance

In this tutorial, you will see how to remove the window regulator knob on the Fiat Panda, a task that is extremely simple and quick. To do this, you will only need a small flat-head screwdriver. First, position yourself in the seat next to the door in question, then grasp the knob, pull it towards you, and locate the slot on the upper outer area. Next, insert the screwdriver into this slot, grasp the retaining clip, and release it. At this point, the knob is free to be removed and possibly replaced.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Window Regulator on the Fiat Panda
How to Replace the Front Window Regulator on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the front window regulator on the Fiat Panda, you need to loosen the screws that secure the door panel: these screws are located at the bo…
How to Replace the Window Regulator on a Fiat Panda 169?
How to Replace the Window Regulator on a Fiat Panda 169?
Fiat Panda (2003-2012 / 169, MK 2) To replace the window regulator on a Fiat Panda 169, use a lever to lift the plastic covers that hide the screws securing the door panel. These cover…
How to Remove the Window Regulator Motor from a Fiat Panda
How to Remove the Window Regulator Motor from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the window regulator motor from a Fiat Panda and don't know how to do it? Let's see how to proceed in this video: disconnect the batter…

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the outside temperature sensor on the Fiat Panda located? Read answer
    • Panda 2003-2012 - What causes the power steering problem on the Fiat Panda? Read answer
    • Panda 2003-2012 - How to adjust the headlights in the Fiat Panda? Read answer
    • Panda 2012-2021 - What is the tightening torque of the rear wheel hub nut of the Fiat Panda? Read answer
    • Panda 2012-2021 - How many liters of fuel does the Fiat Panda have in reserve? Read answer
    • Panda 2003-2012 - Where is the oil pressure sensor located in the Fiat Panda? Read answer
    • Panda 2012-2026 - How to fold back seats in the Fiat Panda? Read answer
    • Panda 2012-2026 - How many km can the Fiat Panda travel in reserve? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos