Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable AdBlue on the 2020 Fiat Talento

Model: Fiat Talento MK 1 - Years 2016-2021
Part: AdBlue warning light

To disable the AdBlue system on the 2020 Fiat Talento, you need to perform a modification on the engine control unit without any need to intervene on the vehicle's mechanics. The cost for disabling the system is between €200 and €300. As shown in the video, you must open the bonnet and remove the control unit. Once removed, connect it to a computer to perform diagnostics and reprogramming. Once reprogrammed, refit it back in place. You will immediately notice the AdBlue warning light has disappeared.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the AdBlue warning light in the Fiat Talento?
How do you reset the AdBlue warning light in the Fiat Talento?
Fiat Talento (2016-2021 / MK 1) The Fiat Talento is a commercial vehicle, mainly used for transporting goods. Like all modern diesel engines, this vehicle also requires the use of t…
Where is the OBD port located on the Fiat Talento?
Where is the OBD port located on the Fiat Talento?
Fiat Talento (2016-2021 / MK 1) If you own a Fiat Talento and don't know where the OBD port is located, through which you can connect a diagnostic tool to the vehicle, then all you …
Where is the Fuse Box Located on the 2019 Fiat Talento?
Where is the Fuse Box Located on the 2019 Fiat Talento?
Fiat Talento (2016-2021 / MK 1) To locate the position of the fuse box in your 2019 Fiat Talento takes just a few seconds. Below, you will find all the instructions you need. First,…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos