Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Carbon Effect Dashboard Trim on the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Dashboard

If you want to give a sporty and attractive look, you can add carbon effect inserts to the interior trim of the dashboard; for the Fiat 500, it is possible to purchase the dashboard trim aftermarket (alternatively, you can use a wrap); to install the new trim, you must remove the original: start by unclipping the climate control console and then unscrew the fixing screws of the trim; once the trim is removed, take out the air vent, buttons, and their respective surrounds before peeling off the plastic reinforcement; then apply each element to the new trim and proceed in reverse for installation.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Dashboard Panel on a Fiat 500?
How to Remove the Dashboard Panel on a Fiat 500?
Fiat 500 (2007-2022 / ) To remove the dashboard panel on a Fiat 500, use a tool to pry off the air vent located on the right side of the dashboard. Once the vent is detached…
How to Replace the Cabin Fan of the Fiat 500?
How to Replace the Cabin Fan of the Fiat 500?
Fiat 500 (2007-2022 / 312) To replace the cabin fan in the Fiat 500, remove the dashboard panel located directly behind the pedal area. Once this panel is removed, you can acce…
Tow Bar Installation on Fiat 500 L Trekking
Tow Bar Installation on Fiat 500 L Trekking
Fiat 500 (2012-2023 / 500 L) In today's video, you will see how to install a tow bar on a Fiat 500 L, Trekking version. In this case, our vehicle is already prepared for the tow …

    Frequently Asked Questions

    • 500 2007-2024 - How much does it cost to replace the dashboard dashboard of the FIAT 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos