Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Light bulb

See other generations:
Video tutorial

To replace the rear bulbs on a Fiat Panda, open the boot and unscrew the two screws next to the rear light to free the plastic cover beneath them. Now that the light is no longer held in place by the screws, grasp it with your hands and pull it outwards.

Clean any debris present, then disconnect the electrical connector. Using a screwdriver, unscrew the four screws behind the light and remove the cover.

Replace the burnt-out bulbs, ensuring to use compatible replacements for your vehicle.


Updated on 18 August 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Lights on the Fiat Panda?
How to Remove the Rear Lights on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, see how to remove the rear lights on the Fiat Panda, a very simple operation to perform if you need to replace a bulb or the entire…
How to Replace the Rear Shock Absorbers on a Fiat Panda
How to Replace the Rear Shock Absorbers on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear shock absorbers on a Fiat Panda, lift the car with a jack or ramp so that the rear wheels do not touch the ground. Remove the rea…
How to remove the rear lights on a Fiat Panda?
How to remove the rear lights on a Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) If you need to change one or more bulbs in the rear lights of the Fiat Panda, you first need to remove the entire light unit, but this is an extremel…

    Frequently Asked Questions

    • Panda 2003-2012 - How many reversing lights are there on the Fiat Panda? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos